Draytek Vigor3900 User Manual page 137

Vigor3900 Series User's Guide
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
4 4 . . 2 2 . . 2 2 . . 2 2 G G e e n n e e r r a a l l S S e e t t t t i i
Available parameters are listed as follows:
Item
PPPoE Server
PPPoE User Isolation
Deny Internet Access
Except PPPoE User
Access Concentrator
(AC) Name
Service Name
Primary DNS
Secondary DNS
PPPoE Server
Authentication Type
User Authentication
n n g g
Description
Disable – Click it to disable this function.
Enable – Click it to enable the function of PPPoE server.
Disable – Click it to disable this function.
Enable – Click it to isolate the PPPoE users who access into
Internet via Vigor router..
Disable –Click it to disable this function.
Enable – If you click Enable, only the PPPoE user can
access into Internet.
Type the name which will be reported as the access
concentrator name.
Type a specific string for authentication.
It causes the named service to be advertised in a Service
Name tagged in the PADO ( PPPoE Active Discovery
Offer ) frame.
Type an IP address as primary DNS.
Type another IP address as secondary DNS.
Choose the authentication type for PPPoE server.
Any PPPoE user shall pass the authentication of PPPoE
server and access into Internet.
Users in LAN can access into Internet through Vigor router
with RADIUS, LDAP or local authentication. Specify the
129