Draytek Vigor3900 User Manual page 346

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
If you choose SSL as the Type in Step 1, you will get the following page:
Item Description
Profile Display the name of the profile.
Enable Check this box to enable such profile.
SSL User Name Choose a user for authentication in SSL connection.
Such profile shall be created in User Management>>User
Profile previously. Otherwise, there are no selections
displayed here.
Local IP / Subnet Type the IP address and subnet mask of local host.
Mask
Type the LAN IP address and LAN subnet mask for the
Remote IP / Subnet
Mask remote host.
Netbios Naming Enable – Click it to have an inquiry for data transmission
Packet between the hosts located on both sides of VPN Tunnel
while connecting.
Disable –When there is conflict occurred between the hosts
on both sides of VPN Tunnel in connecting, such function
can block data transmission of Netbios Naming Packet inside
the tunnel.
Multicast via VPN Some programs might send multicast packets via VPN
connection.



RIP via VPN
Enable – Click this button to let multicast packets pass
through the router.
Disable – This is default setting. Click this button to let
multicast packets be blocked by the router.
Enable – Click it to exchange routing information
338 Vigor3900 Series User's Guide