Draytek Vigor3900 User Manual page 352

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: (0)330 088 0195 Fax: +44 (0)1245 808299
DHCP Server Location
DHCP Server IP
Address
Force L2TP with IPsec
policy
Apply
Cancel
Enter all the settings and click Apply.
4 . 9 . 4 . 3 S S L V P N
4 . 9 . 4 . 3 S S L V P N
This page display current status for VPN tunnel built with SSL protocol.
Available parameters are listed as follows:
Item
User Authentication
Type
LDAP profiles
DHCP from
DHCP Relay
in the LAN.
It is available when DHCP Relay is enabled. Choose the
WAN/LAN interface for the DHCP server.
It is available when DHCP Relay is enabled. Set the IP
address of the DHCP server you are going to use so the relay
agent can help to forward the DHCP request to the DHCP
server.
If it is checked, the router will use L2TP with IPsec policy
for VPN connection.
Click it to save the configuration and exit the dialog.
Click it to discard the settings configured in this page.
Description
Set user authentication to Local server or RADIUS server.
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
selections.
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host in
344
to remove current object
Vigor3900 Series User's Guide