Ip Configuration; Ip Configuration Cli Commands - Avaya P334T-ML Installation And Configuration Manual

Chapter 12 Avaya P330 Layer 3 Features

IP Configuration

IP Configuration CLI Commands

In order to...
Enable IP routing
Set ICMP error messages
Specify the format of netmasks in
the show command output
Create and/or enter the Interface
Configuration Mode
Assign an IP address and mask to
an interface
Set the administrative state of an IP
interface
Update the interface broadcast
address
Define a default gateway (router)
Define the interface RIP route
metric value
Enable net-directed broadcast
forwarding
Set the IP routing mode of the
interface
Enable or disable the sending of
redirect messages on the interface
Check host reachability and
network connectivity
Trace route utility
Create a router Layer 2 interface
Specify the VLAN on which an IP
interface resides
122
Use the following command...
ip routing
ip icmp-errors
ip netmask-format
interface
ip address
ip admin-state
ip broadcast-address
ip default-gateway
default-metric
ip directed-broadcast
ip routing-mode
ip redirect
ping
traceroute
set vlan (Layer 3)
ip vlan/ip vlan name
Avaya P334T-ML User's Guide