Mitsubishi Electric FR-F820-00077 Instruction Manual page 809

Parameters
System configuration
The following shows the system configuration for using the inverter-to-inverter link function. The
master inverter can communicate with the slave inverters through one or two hubs (refer to the de-
scription of Pr. 1124 for the master/slave setting).
(Communication using the inverter-to-inverter function is not available for the inverters directly con-
nected to the router.)
Fig. 5-299:
Device map
The following shows the I/O devices and special registers used for the inverter-to-inverter link func-
tion. (For the details of the other I/O devices and special registers, refer to the PLC Function Program-
ming Manual.)
● I/O device map (master)
Device No.
X40 to X4F
X50 to X5F
X60 to X6F
X70 to X7F
X80 to X8F
Tab. 5-354: I/O devices for the master inverter
● I/O device map (slave)
Device No.
X40 to X4F
Tab. 5-355: I/O devices for the slave inverter
FR-F800
Router
Hub
Inverter Inverter
(master) (slave 1)
System configuration of the inverter-to-inverter link function
Name
Inverter-to-inverter link input (from
slave 1 to master)
Inverter-to-inverter link input (from
slave 2 to master)
Inverter-to-inverter link input (from
slave 3 to master)
Inverter-to-inverter link input (from
slave 4 to master)
Inverter-to-inverter link input (from
slave 5 to master)
Name
Inverter-to-inverter link input (from
master to slave)
Inverter-to-inverter link function (FR-F800-E)
Inverter Inverter Inverter
(slave 2) (slave 3) (slave 4)
Device No.
Y40 to Y4F
Y50 to Y5F
Y60 to Y6F
Y70 to Y7F
Y80 to Y8F
Device No.
Y40 to Y4F
Personal computer
(FR Configurator2)
Hub
Inverter
(slave 5)
Name
Inverter-to-inverter link output (from
master to slave 1)
Inverter-to-inverter link output (from
master to slave 2)
Inverter-to-inverter link output (from
master to slave 3)
Inverter-to-inverter link output (from
master to slave 4)
Inverter-to-inverter link output (from
master to slave 5)
Name
Inverter-to-inverter link output (from
slave to master)
I003139E
5 - 637