Mitsubishi Electric FR-F820-00077 Instruction Manual page 381

Parameters
Minus sign display for the monitors (Pr. 290)
● A negative output can be selected for the monitor display of the terminal AM (analog voltage
output), the operation panel, and a communication option. For a list of the monitors that can
output values with minus signs, refer to the monitor description list (on page 5-199).
Pr. 290 setting
0 (initial value)
⎯: Output without minus sign (positive values only)
Tab. 5-93:
● Select items to be displayed with minus signs using Pr. 1018 "Monitor with sign selection".
Types of monitor
Output frequency
Running speed
Motor torque
PID deviation
BACnet terminal AM output level
Remote output 1
Remote output 2
: Displayed with minus sign,
⎯: Displayed without minus sign (positive only)
Tab. 5-94:
Displayed without minus sign on the operation panel. Confirm the rotation direction with the
[FWD] or [REV] indicator.
NOTES When terminal AM (analog voltage output) is "output with a minus sign", the output will be within
the –10 V DC to +10 V DC range. Connect the meter with which output level is matched.
Parameter unit (FR-PU07) displays only positive values.
FR-F800
Terminal AM output
⎯
1 Output with a minus sign
⎯
2
3 Output with a minus sign
⎯
4
5 Output with a minus sign
⎯
6
7 Output with a minus sign
Minus sign display for the monitors
Pr. 1018 setting
9999
—
—





Minus sign display using Pr. 1018
(M) Monitor display and monitor output signal
Operation panel display
⎯
⎯
Displayed with minus sign
Displayed with minus sign
⎯
⎯
Output with a minus sign
Output with a minus sign
Types of monitor
0

Remote output 3

Remote output 4

PID manipulated amount

Second PID deviation

Second PID manipulated amount

Control circuit temperature

Negative indication on
communication options
⎯
⎯
⎯
⎯
Output with a minus sign
Output with a minus sign
Output with a minus sign
Output with a minus sign
Pr. 1018 setting
9999 0
 
 
 
 
 
 
5 - 209