Connecting Ac Power To An Ex4500 Switch - Juniper EX4500 Hardware Manual

Connecting AC Power to an EX4500 Switch

Copyright © 2017, Juniper Networks, Inc.
Connecting AC Power to an EX4300 Switch
Connecting DC Power to an EX4300 Switch
Connecting AC Power to an EX4500 Switch on page 141
Connecting DC Power to an EX4500 Switch on page 144
Connecting AC Power to an EX4550 Switch
Connecting DC Power to an EX4550 Switch
Connecting AC Power to an EX6200 Switch
Connecting DC Power to an EX6200 Switch
Connecting AC Power to an EX8200 Switch
Connecting DC Power to an EX8200 Switch
Connecting AC Power to an EX9204 Switch
Connecting DC Power to an EX9204 Switch
Connecting AC Power to an EX9208 Switch
Connecting DC Power to an EX9208 Switch
Connecting AC Power to an EX9214 Switch
Connecting DC Power to an EX9214 Switch
General Safety Guidelines and Warnings on page 251
Grounded Equipment Warning on page 266
The AC power supply in an EX4500 switch is a hot-removable and hot-insertable
field-replaceable unit (FRU). After you have installed at least one power supply, you can
connect power to the switch.
CAUTION: Operating the switch with an incorrect power supply might cause
the chassis to overheat. See
Switch" on page
CAUTION: To meet safety and electromagnetic interference (EMI)
requirements and to ensure proper operation, you must connect the switch
to earth ground before you connect it to power.
For installations that require a separate grounding conductor to the chassis,
use the protective earthing terminal on the switch chassis to connect to the
earth ground. For instructions on connecting the switch to ground using a
Chapter 13: Connecting the Switch to Power
"Installing an AC Power Supply in an EX4500
184.
141