Table 24: Chassis Viewer For Ex2200-C Switches; Table 25: Chassis Viewer For Ex3200, Ex3300, And Ex4200 Switches - Juniper EX4500 Hardware Manual

Table 23: Chassis Viewer for EX2200 Switches (continued)
Field
Management ( ) port
me0
Console port
USB port
Fan tray
Power supply

Table 24: Chassis Viewer for EX2200-C Switches

Field
Front View
Interface status
Management ( me0 ) port
Console port
USB port
Rear View
Power supply

Table 25: Chassis Viewer for EX3200, EX3300, and EX4200 Switches

Field
Front View
Copyright © 2017, Juniper Networks, Inc.
Description
The management port is used to connect the switch to a management device for out-of-band
management.
The console port is used to connect the switch to a management console or to a console
server. (You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for
your EX Series switch.
Mouse over the fan tray icon to display name, status, and description information.
Mouse over the power outlet icon to display name, status, and description information.
Description
In the image, the following colors denote the interface status:
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
Mouse over the interface (port) to view more information.
The management port is used to connect the switch to a management device for out-of-band
management.
The console port is used to connect the switch to a management console or to a console
server. (You might do this for initial switch configuration.)
Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for
your EX Series switch.
Mouse over the power outlet icon to display name, status, and description information.
Description
Chapter 5: Viewing System Information
53