Table 65: Chassis Component Alarm Conditions On Ex4500 Switches - Juniper EX4500 Hardware Manual

Copyright © 2017, Juniper Networks, Inc.

Table 65: Chassis Component Alarm Conditions on EX4500 Switches

Chassis
Component Alarm Condition
Power A power supply has
supplies been removed from
the chassis.
An unknown power
supply is installed.
The power supply is
offline or the power
supply output has
failed.
Chapter 27: Alarms and Syslog Messages
Alarm
Severity Remedy
Minor Install a power supply into the empty slot.
(yellow)
Minor Install a power supply recommended by
(yellow) Juniper Networks.
Major Open a support case using the Case
(red) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
or call
237