Pluggable Transceivers Supported On Ex Series Switches - Juniper EX4500 Hardware Manual

EX4500 Switch Hardware Guide
Related
Documentation

Pluggable Transceivers Supported on EX Series Switches

90
Front Panel of an EX4500 Switch on page 17
Installing a Transceiver on page 203
Removing a Transceiver on page 205
The transceivers for EX Series switches are hot-removable and hot-insertable
field-replaceable units (FRUs): You can remove and replace them without powering off
the switch or disrupting switch functions.
NOTE: After you insert a transceiver or after you change the media-type
configuration, wait for 6 seconds for the interface to display the operational
commands.
Use only optical transceivers and optical connectors purchased from Juniper Networks
for your EX Series switches.
For the list and specifications of transceivers supported on EX2200 switches, see
Pluggable Transceivers Supported on EX2200 Switches.
For the list and specifications of transceivers supported on EX2300 switches, see
Pluggable Transceivers Supported on EX2300 Switches.
For the list and specifications of transceivers supported on EX3200 switches, see
Pluggable Transceivers Supported on EX3200 Switches.
For the list and specifications of transceivers supported on EX3300 switches, see
Pluggable Transceivers Supported on EX3300 Switches.
For the list and specifications of transceivers supported on EX3400 switches, see
Pluggable Transceivers Supported on EX3400 Switches.
For the list and specifications of transceivers supported on EX4200 switches, see
Pluggable Transceivers Supported on EX4200 Switches.
For the list and specifications of transceivers supported on EX4300 switches, see
Pluggable Transceivers Supported on EX4300 Switches.
For the list and specifications of transceivers supported on EX4500 switches, see
"Pluggable Transceivers Supported on EX4500 Switches" on page
For the list and specifications of transceivers supported on EX4550 switches, see
Pluggable Transceivers Supported on EX4550 Switches.
For the list and specifications of transceivers supported on EX4600 switches, see
Determining Interface Support for an EX4600 Switch.
For the list and specifications of transceivers supported on EX6200 switches, see
Pluggable Transceivers Supported on EX6200 Switches.
89.
Copyright © 2017, Juniper Networks, Inc.