Rack Requirements; Table 37: Physical Specifications Of The Ex4500 Switch Chassis; Table 38: Rack Requirements And Specifications - Juniper EX4500 Hardware Manual

EX4500 Switch Hardware Guide

Table 37: Physical Specifications of the EX4500 Switch Chassis

Description
Chassis height
Chassis width
Chassis depth
Weight
Related
Documentation

Rack Requirements

Table 38: Rack Requirements and Specifications

Rack Requirement
Rack type
74
Value
3.5 in. (8.9 cm)
17.25 in. (43.82 cm)
The outer edges of the front-mounting brackets extend the width to 19 in. (48.3 cm).
21.1 in. (53.6 cm)
EX4500 switch with 1 AC power supply: 37 lb (17 kg)
AC power supply: 3 lb (1.3 kg)
DC power supply: 3 lb (1.3 kg)
You can mount an EX4500 switch on a standard 19-in. two-post rack. You can also
mount an EX4500 switch on a standard 19-in. four-post rack or in a standard 19-in.
enclosed cabinet.
Rack Requirements on page 74
Cabinet Requirements on page 75
Mounting an EX4500 Switch on page 126
Installing and Connecting an EX4500 Switch on page 125
Installing and Removing EX4500 Switch Hardware Components on page 132
You can mount the device on two-post racks or four-post racks.
Rack requirements consist of:
Rack type
Mounting bracket hole spacing
Rack size and strength
Rack connection to the building structure
Table 38 on page 74 provides the rack requirements and specifications.
Guidelines
You can mount the device on a rack that provides bracket holes or hole patterns spaced
at 1 U (1.75 in. or 4.45 cm) increments and meets the size and strength requirements to
support the weight.
A U is the standard rack unit defined by the Electronics Industry Association.
Copyright © 2017, Juniper Networks, Inc.