Juniper EX4500 Hardware Manual page 262

EX4500 Switch Hardware Guide
240
Table 65: Chassis Component Alarm Conditions on EX4500
Switches (continued)
Chassis
Component Alarm Condition
Media Device booted from
backup root.
/var /config
or
(only 10% free)
/var /config
or
(only 25% free)
Upgrade bank is
empty or corrupted.
Firmware version is
not the latest.
Single-bit ECC error
detected.
Alarm
Severity Remedy
Minor Open a support case using the Case
(yellow) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major Open a support case using the Case
full
(red) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Minor Open a support case using the Case
full
(yellow) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major Open a support case using the Case
(red) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Minor Open a support case using the Case
(yellow) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Major Open a support case using the Case
(red) Manager link at
http://www.juniper.net/support/
1-888-314-5822 (toll-free within the United
States and Canada) or 1-408-745-9500
(from outside the United States).
Copyright © 2017, Juniper Networks, Inc.
or call
or call
or call
or call
or call
or call