EX4500 Switch Hardware Guide
Related
Documentation
218
Figure 69: Removing the Virtual Chassis Module from an EX4500 Switch
NOTE:
If you have a Juniper J-Care service contract, register any addition,
change, or upgrade of hardware components at
https://www.juniper.net/customers/support/tools/updateinstallbase/
to do so can result in significant delays if you need replacement parts. This
note does not apply if you replace existing components with the same type
of component.
Installing a Virtual Chassis Module in an EX4500 Switch on page 213
Installing and Removing EX4500 Switch Hardware Components on page 132
Press on the outside edges of the module slot,
then pull the Virtual Chassis module straight out.
Copyright © 2017, Juniper Networks, Inc.
. Failure