Rear Panel Of An Ex4500 Switch; Figure 5: Label Identifying Ex4500 Switches That Support Dcb - Juniper EX4500 Hardware Manual

EX4500 Switch Hardware Guide
Related
Documentation

Rear Panel of an EX4500 Switch

18
EX4500 switches that have the label
Center Bridging (DCB), also known as Converged Enhanced Ethernet (CEE). See
Figure 5 on page 18.

Figure 5: Label Identifying EX4500 Switches that Support DCB

0 1 2 3 ST
0 2 4 6 8 10 12 14
1 3 5 7 9 11 13 15
Rear Panel of an EX4500 Switch on page 18
LCD Panel in EX4500 Switches on page 20
Chassis Status LEDs in EX4500 Switches on page 29
Network Port and Uplink Module Port LEDs in EX4500 Switches on page 32
Uplink Modules in EX4500 Switches on page 25
Pluggable Transceivers Supported on EX4500 Switches on page 89
Installing and Removing EX4500 Switch Hardware Components on page 132
The rear panel of the EX4500 switch consists of the following components:
Power supply or power supplies
One of the following:
AC appliance inlet and AC power supply LED
DC terminal block and DC power supply LED
Fan tray
One of the following:
Intraconnect module
Virtual Chassis module
VIRTUAL CHASSIS
0 1 2 3 ST
16 18 20 22 24 26 28 30 32
17 19 21 23 25 27 29 31 33
Copyright © 2017, Juniper Networks, Inc.
on the front panel support Data
CON
34 36 38
35 37 39
MGMT