Unpacking The Switch; Unpacking An Ex4500 Switch; Chapter 11 Unpacking The Switch - Juniper EX4500 Hardware Manual

CHAPTER 11

Unpacking the Switch

Unpacking an EX4500 Switch

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Unpacking an EX4500 Switch on page 121
Parts Inventory (Packing List) for an EX4500 Switch on page 122
Registering Products—Mandatory for Validating SLAs on page 123
The EX4500 switches are shipped in a cardboard carton, secured with foam packing
material. The carton has an accessory compartment and contains the quick start
instructions.
CAUTION: EX4500 switches are maximally protected inside the shipping
carton. Do not unpack the switches until you are ready to begin installation.
To unpack the switch:
Open the carton.
1.
Pull out the packing material holding the switch in place.
2.
Verify the parts received against the inventory on the label attached to the carton.
3.
See "Parts Inventory (Packing List) for an EX4500 Switch" on page
Save the shipping carton and packing materials in case you need to move or ship the
4.
switch later.
Installing and Connecting an EX4500 Switch on page 125
Connecting and Configuring an EX Series Switch (CLI Procedure) on page 159
Connecting and Configuring an EX Series Switch (J-Web Procedure) on page 162
122.
121