Configuring A Custom Display Message - Juniper EX4500 Hardware Manual

Configuring a Custom Display Message

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
To enable a menu option:
[edit]
user@switch# delete chassis lcd-menu menu-item menu-option disable
You can configure the second line of the LCD to display a custom message temporarily
for 5 minutes or permanently.
To display a custom message temporarily:
On an EX3200 switch, a standalone EX3300 switch, a standalone EX4200 switch, a
standalone EX4300 switch, a standalone EX4500 switch, a standalone EX4550 switch,
an EX6200 switch, an EX8200 switch, or an XRE200 External Routing Engine:
user@switch> set chassis display message message
On an EX3300, EX4200, EX4300, EX4500, or EX4550 switch in a Virtual Chassis
configuration:
user@switch> set chassis display message message fpc-slot slot-number
To display a custom message permanently:
On an EX3200 switch, a standalone EX3300 switch, a standalone EX4200 switch, a
standalone EX4300 switch, a standalone EX4500 switch, a standalone EX4550 switch,
an EX6200 switch, an EX8200 switch, or an XRE200 External Routing Engine:
user@switch> set chassis display message message permanent
On an EX3300, EX4200, EX4300, EX4500, or EX4550 switch in a Virtual Chassis
configuration:
user@switch> set chassis display message message fpc-slot slot-number permanent
NOTE: The buttons on the LCD panel are disabled when the LCD is configured
to display a custom message.
To disable the display of the custom message:
user@switch> clear chassis display message
You can view the custom message by issuing the
LCD Panel in EX3200 Switches
LCD Panel in EX3300 Switches
LCD Panel in EX4200 Switches
LCD Panel in EX4300 Switches
Chapter 15: Performing Initial Configuration
command.
show chassis lcd
167