Juniper EX4500 Hardware Manual page 105

Table 41: AC Power Cord Specifications for an EX4500 Switch (continued)
Country/Region Electrical Specifications
Taiwan 250 VAC, 16 A, 50 Hz
United 250 VAC, 13 A, 50 Hz
Kingdom
Power Cable Warning (Japanese)
WARNING: The attached power cable is only for this product. Do not use the cable for another product.
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Plug Standards
NEMA L6-20P Type
NEMA LOCKING
BS 1363/A Type BS89/13
CAUTION: The AC power cord for the EX4500 switch is intended for use with
this switch only and not for any other use.
CAUTION: Power cords must not block access to switch components.
WARNING: The switch is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal
provided on the chassis in addition to the grounding pin of the power supply
cord. This separate protective earthing terminal must be permanently
connected to earth ground. See
Switch" on page 135.
AC Power Supply in EX4500 Switches on page 39
AC Power Electrical Safety Guidelines on page 282
AC Power Disconnection Warning on page 283
Chapter 7: Power Specifications and Requirements
Juniper Model Number Graphic
CBL-EX-PWR-C19-TW
CBL-EX-PWR-C19-UK
"Connecting Earth Ground to an EX Series
83