Graphical Chassis Viewer; Table 18: Details Of A Virtual Chassis Member Switch - Juniper EX4500 Hardware Manual

EX4500 Switch Hardware Guide

Graphical Chassis Viewer

Table 18: Details of a Virtual Chassis Member Switch

Details
Model number of the member switch
Assigned ID that applies to the entire Virtual Chassis
configuration
Role of the member switch
Status of the member switch
46
File System Usage on page 52
Chassis Viewer on page 52
The Dashboard panel displays a graphical view of the chassis of a switch. In a Virtual
Chassis, it displays a graphical view of each member switch.
In a Virtual Chassis, the default values are shown on the Dashboard panel when no chassis
image is clicked. The panel displays the value for a switch if you click its image.
NOTE: If the member switch is not present, inactive, or not provisioned, you
cannot expand the member switch image.
In J-Web Application package Release 14.1X53-A2, you can form a Virtual
Chassis using EX4600 and EX4300 switches. When in a mixed Virtual Chassis
consisting of EX4600 switches and EX4300 switches, the EX4600 switches
can be the master, backup, or in the linecard role, while the EX4300 switches
must be in the linecard role.
Table 18 on page 46 lists the details that are displayed on each member switch.
The status of the member switch is displayed on the image of the switch. If the member
switch appears dimmed, it means the switch is not present, is inactive, or is not provisioned
in the Virtual Chassis. If the member switch does not appear dimmed, it means the switch
is present and is active.
Table 19 on page 47 describes the possible status of a member switch.
Example
EX3300
ID 2
NOTE: If the member switch is not provisioned, the serial number
of the switch is displayed instead of its ID.
Master
Possible roles are: ,
Master Backup
Prsnt
Possible statuses are: Prsnt , NotPrsnt
, or
Linecard
, Inactive , or Unprvsnd
Copyright © 2017, Juniper Networks, Inc.