Juniper EX4500 Hardware Manual page 83

Table 31: Chassis Viewer for EX8208 Switches (continued)
Field Description
Interface status In the image, click any line card, SRE module, or SF module to view the front view of the selected
component. In the image, the colors listed below denote the interface status:
Mouse over the interface (port) to view more information.
You can view status for the following ports on the SRE module:
Because the SF module has no ports, no status information is displayed.
Slot numbers Slots on the switch are labeled, from the top of the switch down:
Temperature The active slots contain a gray temperature icon. Mouse over the icon to display temperature
information for the slot.
Fan status Mouse over the fan tray icon to display name, status, and description information.
Power supplies Mouse over the power supply icons to display name, status, and description information.
LCD panel LCD panel configured for the LEDs on the ports. Mouse over the icon to view the current character
display.
Rear View The EX8208 switch does not have any components on the rear of the chassis.
Copyright © 2017, Juniper Networks, Inc.
Green—Interface is up and operational.
Yellow—Interface is up but is nonoperational.
Gray—Interface is down and nonoperational.
USB port—Indicates the USB port for the switch.
NOTE: We recommend that you use USB flash drives purchased from Juniper Networks for your
EX Series switch.
Auxiliary port—This port is unavailable.
Management ( me0 ) port—The management port is used to connect the switch to a management
device for out-of-band management.
Console port—The console port is used to connect the switch to a management console or to a
console server. (You might do this for initial switch configuration.)
0–3 (line cards)
SRE0, SF, SRE1 (SRE and SF modules)
4–7 (line cards)
Chapter 5: Viewing System Information
61