CHAPTER 7
Port and Interface Specifications
USB Port Specifications for an ACX5000 Router
Copyright © 2015, Juniper Networks, Inc.
USB Port Specifications for an ACX5000 Router on page 57
Console Port Connector Pinouts for an ACX5000 Router on page 58
Management Port Connector Pinouts for an ACX5000 Router on page 58
Interface Support for an ACX5000 Router on page 59
Interface Specifications for SFP, SFP+, and QSFP+ Transceivers for an ACX5000
Router on page 62
Interface Specifications for SFP+ DAC Cables for an ACX5000 Router on page 77
Interface Specifications for QSFP+ DAC Breakout Cables for an ACX5000
Router on page 82
Interface Specifications for QSFP+ DAC Cables for an ACX5000 Router on page 86
The following Juniper Networks USB flash drives have been tested and are officially
supported for the USB port in the ACX5000 routers:
RE-USB-1G-S—1-gigabyte (GB) USB flash drive
RE-USB-2G-S—2-GB USB flash drive
RE-USB-4G-S—4-GB USB flash drive
CAUTION:
Any USB memory product not listed as supported for the ACX5000
routers has not been tested by Juniper Networks. The use of any unsupported
USB memory product could expose your device to unpredictable behavior.
Juniper Networks Technical Assistance Center (JTAC) can provide only limited
support for issues related to unsupported hardware. We strongly recommend
that you use only supported USB flash drives.
CAUTION:
Remove the USB flash drive before upgrading Junos OS or
rebooting a ACX5000 routers. Failure to do so could expose your device to
unpredictable behavior.
57