Leds On Acx2200 Routers; System Led On The Front Panel; Ethernet Port Leds; Sfp And Sfp+ Port Leds - Juniper ACX2200 Hardware Manual

LEDs on ACX2200 Routers

System LED on the Front Panel

Ethernet Port LEDs

SFP and SFP+ Port LEDs

Copyright © 2017, Juniper Networks, Inc.
The following LEDs are supported on ACX2200 routers:
System LED on the Front Panel on page 15
Ethernet Port LEDs on page 15
SFP and SFP+ Port LEDs on page 15
Management and Console Port LEDs on the Front Panel on page 16
One bicolor LED labeled
SYS
describes the system LED in more detail.

Table 5: System LED on the Front Panel

Label Color
Green
SYS
Red
The front panel has eight Gigabit Ethernet RJ-45 ports, each with one pair of port LEDs.
Table 6 on page 15 describes the LEDs in more detail.

Table 6: Ethernet Port LEDs

Name Location
Link Left
RX Right
The front panel has six Gigabit Ethernet SFP ports and two 10-Gigabit Ethernet SFP+
ports, each with one pair of port LEDs.
detail.
Chapter 2: Chassis Components and Descriptions
indicates the status of the router.
State Description
Blinking Router is transitioning online.
On steadily Router is functioning normally.
Blinking Router has reported an alarm.
On steadily Router has failed.
Color State
Green On
– Off
Green Blinking
– Off
Table 7 on page 16
Table 5 on page 15
Description
Link is online.
No link.
The port is receiving data.
The port is not receiving data.
describes the LEDs in more
15