Ex2300 Switch Models - Juniper EX2300 Series Hardware Manual

2 Serial number ID label
—
Figure 15: Rear Panel of an EX2300-48MP Switch
1 CLEI code label
—
Serial number ID label
2
—

EX2300 Switch Models

The EX2300 switch is available with 12 or 24, or 48 built-in RJ-45 network ports with full Power over
Ethernet (PoE) or Power over Ethernet plus (PoE+) capability on all built-in RJ-45 network ports (access
ports), or no PoE capability.
EX2300-C switches have two uplink ports. EX2300 switches except the EX2300-C switch model and
the EX2300-48MP switch model have four uplink ports. The EX2300-48MP switch model has six 10-
Gigabit Ethernet uplink ports. These uplink ports support SFP and SFP+ transceivers. You can use these
uplink ports as network ports or configure these ports as Virtual Chassis ports (VCPs) and use them to
connect up to four switches by using SFP+ transceivers to form a Virtual Chassis. You cannot form a
Virtual Chassis by using SFP transceivers. Uplink ports do not support PoE.
Table 1: EX2300 Switch Models
Model Access Ports
EX2300-C-12T 12 Gigabit
Ethernet
Table 1 on page 15 lists the EX2300 switch models.
Virtual Chassis
License
Not available
4 AC power cord inlet
—
3 AC power cord inlet
—
ESD point
4
—
Ports in Which Maximum
PoE Is Available System
Power
Available for
PoE/PoE+
– –
15
First
Junos OS
Release
15.1X53-
D50