Hitachi WJ200-001S Instruction Manual page 75

226
Keys, Modes, and Parameters
The purpose of the keypad is to provide a way to
change modes and parameters. The term function
applies to both monitoring modes and parameters.
These are all accessible through function codes that
are primary 4-character codes. The various functions
are separated into related groups identifiable by the
left-most character, as the table shows.
Function
Group
"D"
"F"
"A"
"B"
"C"
"H"
"P"
"U"
"E"
You can see from the following page how to monitor and/or program the parameters.
Keypad Navigation Map
The WJ200 Series inverter drives have many programmable functions and parameters.
Chapter 3 will cover these in detail, but you need to access just a few items to perform
the powerup test. The menu structure makes use of function codes and parameter
codes to allow programming and monitoring with only a 4-digit display and keys and
LEDs. So, it is important to become familiar with the basic navigation map of
parameters and functions in the diagram below. You may later use this map as a
reference.
Type (Category) of Function
Monitoring functions
Main profile parameters
Standard functions
Fine tuning functions
Intelligent terminal functions
Motor constant related functions
Pulse train input, torque, EzSQ, and
communication related functions
User selected parameters
Error codes

STOP/
RUN 1
RESET
ESC 2 SET
PRG LED
Mode to Access
Indicator
Monitor
Program
Program
Program
Program
Program
Program
Program

RUN PWR
Hz ALM
A
PRG








