Kodak DryView 8300 Service Bulletins page 77

DryView 8600/8610 Laser Imaging System Service Manual
2-13. Configuring the 9410 for Input from the DICOM Network
Refer to paragraph 3-18 in the PACS Link 9410 Service Manual for instructions for configuring the 9410 to
receive images as a print server on a DICOM Network. The parameters must be set to the following
values:
1. Under the Current Providers tab (for SCP printers):
SCP Parameters:
Printer = 8600 or 8610
Port = 1024
SCP AE Title = 9410
Max # of Associations = 5
2. Under the Registered Users tab (for Service Class Users):
SCU Identification Parameters:
SCU AE Title = Get from OEM (GE may use host name acquired from workstation "Service Tool"
screen.)
SCU IP Address = Assigned to the modality by customer's network administrator.
SCP = 8600 or 8610 Print Server
Default Parameters:
# of Copies = 1
Contrast Table = Varies with the modaity. See Table 2-4.
TFT/ULUT (Not configurable)
Max. Density = 350
Border Density = 4095
Magnification Type = 8 (cubic)
Smoothing Type = 1 (See Table 2-4.)
Polarity = 1
Orientation = 1
Priority = Low
Set Requested Image Size (Unchecked)
Gamma Table = Linear in Transmittance
Contrast Group = Varies with the modality. See Table 2-4.
Kernel Group = Varies with the modality. See Table 2-4.
SCP Printer Options:
Pixel Data Interceptor = On
N-Event-Print Jobs = Off
N-Event-Printer = Off
Contrast Test Mode = Off
Attribute Warning = Off
Trim = Off
Contrast Test Mode Density = 0
Modality
GE Senographe 2000D
Lorad TDMS
Fischer
2-8
Table 2-4. 9410 Parameters that Vary with the Modality
Contrast (Table) Contrast Group
3
6
3
Smoothing
6 1
7 1
5 1
Kernel Group
1
1
1
2000 December Rev. B