Kodak DryView 8300 Service Bulletins page 151

SERVICE BULLETIN
Health Imaging Products
Eastman Kodak Company, Health Imaging, Rochester, NY 14650
SERVICE BULLETIN NO. 861 APRIL 2004
Kodak DryView 8600/8610 LASER IMAGERS
Service Codes: 1437, 1438, 1439
ProComm Plus COMMUNICATIONS PROGRAM To Be Used When Uploading System
Software
Purpose
The purpose of this Service Bulletin is to communicate that the Hyperterminal
COMMUNICATIONS PROGRAM does not function adequately when used with the newest models
of LAPTOP COMPUTERS.
Description
The inefficiency of the Hyperterminal COMMUNICATIONS PROGRAM, when used with the new
higher-speed LAPTOP COMPUTERS, can cause it to take up to four hours to upload new system
software into the Kodak DryView 8600/8610 LASER IMAGERS. The Pro Comm Plus
COMMUNICATIONS PROGRAM is a more sophisticated program that will allow software
uploads to take no longer than 10-12 minutes. In addition, the ProComm Plus
COMMUNICATIONS PROGRAM will provide an estimate of the total time required for a software
upload as well as a progress gauge.
Procedure
The next time you install a software upgrade in a Kodak DryView 8600/8610 LASER IMAGER,
follow the procedure in paragraph 2-17-2 in the SERVICE MANUAL for the Kodak DryView
8600/8610 LASER IMAGERS.
Eastman Kodak Company, 2004
Eastman Kodak Company Restricted Pub No. 7F6200