Kodak DryView 8300 Service Bulletins page 104

SERVICE BULLETIN
Health Imaging Products
Eastman Kodak Company, Health Imaging, Rochester, NY 14650
SERVICE BULLETIN NO. 32
1437 and 1439 Kodak DryView 8600/8610 LASER IMAGING SYSTEM
Cost Savings for Replacing PRESSURE ROLLERS
Purpose
The purpose of this service bulletin is to identify the cost savings possible when it is necessary to replace the
following parts in the PROCESSOR ASSEMBLY 78-8113-2151-8.
Part Number
78-8113-2150-0
78-8113-2102-1
78-8113-2103-9
Problem Description
If a PRESSURE ROLLER in either ROLLER ASSEMBLY stops rotating, the ROLLER surface could
deplate or flatten in areas. When this occurs, aluminum deposits could cover the DRUM and change the
DRUM color to black.
Problem Correction
If the ROLLERS are damaged, install a new ROLLER ASSEMBLY and clean the DRUM. If the DRUM is
also damaged, install a new DRUM. Do not install a new PROCESSOR ASSEMBLY to correct these
problems.
Cost Savings
Replacing only the damaged ROLLER ASSEMBLIES and DRUM, in place of installing a new PROCESSOR
ASSEMBLY, will result in the following cost savings for Kodak.
©Eastman Kodak Company, 2002
Description
DEVELOPER DRUM ASSEMBLY, Gray
PRESSURE (3) ROLLER ASSEMBLY, Base
PRESSURE (9) ROLLER ASSEMBLY, Cover
SEPTEMBER 2002
Pub No. 8E6694