Kodak DryView 8300 Service Bulletins page 155

Procedure
Service Manual for the Kodak DryView 8600/8610 LASER IMAGERS
The procedure in the and the
Mod 1 instructions refer to installing software upgrades using the HyperTerminal program that is resident in
the Windows OPERATING SYSTEMS (OS). However, while the HyperTerminal program was adequate for
older service computers using the Windows 95 OS, the download process is too slow when using the program
with the newer service computers. Users of newer service computers must use a more sophisticated program
such as ProComm Plus to be able to download the imager system software in less than one half hour. Follow
Service Manual for the Kodak DryView
the setup instructions for ProComm Plus in Section 2-17-2 in the
8600/8610 LASER IMAGERS
.
Page 3 Pub No. 8F0642