Kodak DryView 8300 Service Bulletins page 20

Use the keyboard to insert the 8300 network printer configuration parameters as follows:
Alias IP Address
3M8300_254 Determined by System
Administrator
7. Close the menu
Device File Table
The 8300 device file is not in the system software because the memory overflow problem had not
been resolved when the DICOM print software for the HDI 3000 was released. ATL plans an 8300
disk that will be used to install the table on the HDI 3000 and 5000. The table can also be installed
manually.
1. Press the Setups key to access the Setups Options directory.
2. Select Access Link Directory.
3. Select Configuration Files.
4. Select Edit.
5. Select Devices.
Port Number
104 3m_8300_Printer_v1
Model 8300 Technical Bulletins
Model ID AE Title
3M_8300