Kodak DryView 8300 Service Bulletins page 126

SERVICE BULLETIN
Health Imaging Products
Eastman Kodak Company, Health Imaging, Rochester, NY 14650
SERVICE BULLETIN NO. 43 October 2003
Kodak DryView 8600/8610 LASER IMAGERS
Service Codes: 1437, 1438, 1439
New System Software to Accommodate Future FILM Offerings
Purpose
The purpose of this service bulletin is to communicate that there is new system software being
released to the field that will allow both IMAGERS to print images on new, faster FILM than
what is currently available.
The plan is to update all IMAGERS in the field to permit the possible future introduction of the
new faster FILM without requiring a mandatory software update before the new FILM is used.
Details
The system software to accomplish this is Version 2.5 for the Kodak DryView 8600 LASER
IMAGER and Version 2.4 for the Kodak DryView 8610 LASER IMAGER. The system
software is different for each model of IMAGER and is not interchangeable. This software
includes the most recent contrast tables and correction of some minor bugs. Additionally, in the
case of the Kodak DryView 8610 LASER IMAGER, this software simplifies the adjustment of
the PROCESSOR temperature by eliminating the need for end zone adjustment. The software
for both IMAGERS is downloaded using the procedure in the service manual and by following
the modification instructions in Modification Number 1.
Eastman Kodak Company, 2003
Pub No. 8E9726