Service & Support
Health Imaging
Kodak DryView 8300 LASER IMAGERS
Technical Bulletin
18-01/02
FILM TRAY will not Unlock - Reissue
Problem
The FILM TRAY will not unlock and cannot be pulled out because the FILM TRAY DETECTION PIN is
caught on the side of the FILM TRAY.
Cause
The TOP COVER RELEASE BUTTON is partially engaged because it is pressed against the RIGHT SIDE
PANEL. This binds up the LOCKING MECHANISM so it cannot move freely and release the FILM
TRAY.
Solution
Install a new COVER RELEASE BUTTON ASSEMBLY 78-8113-2013-0 that includes a smaller
RELEASE BUTTON.
January 2002
Eastman Kodak Company
Health Imaging Products
1 Imation Way
Oakdale, MN 55128
http://www.kodak.com
Printed in the U.S.A.
© Kodak 2002