Kodak DryView 8300 Service Bulletins page 25

DryView Laser Imager
Model 8300
Technical Bulletin
3-6/99 Film Count (Exposures) Meter Reading
There are two quick ways to check the film count on the 8300. First, press either Setup button,
followed by 999 and Enter. Then arrow down to item 10. Exposures. The film count labelled
Exposures will be displayed. Press Exit to return the 8300 to the Ready condition. A second and
quicker way is to press Test, followed by 911 and Enter. The first menu item displayed is 1. Examine
System Error Log. Press Enter and the first log entry will display the film count labelled as
Exposures. Press Exit twice to return the 8300 to the Ready condition.
Kodak Health Imaging
1 Imation Place
Discovery 4B-74
Oakdale, MN 55125
Tel. (651) 704-4000
http://www.kodak.com
07/30/99
Printed in the U.S.A.
Kodak 1999 July