Kodak DryView 8300 Service Bulletins page 153

SERVICE BULLETIN
Health Imaging Products
Eastman Kodak Company, Health Imaging, Rochester, NY 14650
SERVICE BULLETIN NO. 942 November 2004
Kodak DryView 8600/8610 LASER IMAGERS
Service Codes: 1437, 1438, 1439
Re-Issue: New System Software to Accommodate Film Offerings
Purpose
The purpose of this Service Bulletin is to communicate that new system software being
released to the field that will allow both imagers to print images on new, faster film.
Originally, the software was developed for future film offerings, but we have since found that it
is often needed to allow DVM Version 3.0, Catalog Number 864-0823, film to function
properly in some imagers.
The plan now is to update all imagers in the field with a required modification to permit the
introduction of new faster film such as DVM Version 3.0.
Details
The system software to accomplish this is Version 2.5 for the Kodak DryView 8600 LASER
IMAGER and Version 2.4 for the Kodak DryView 8610 LASER IMAGER. The system
software is different for each model of imager and is not interchangeable. This software
includes the most recent contrast tables and correction of some minor bugs. Additionally, in the
case of the Kodak DryView 8610 LASER IMAGER, this software simplifies the adjustment of
the processor temperature by eliminating the need for end zone adjustment. The software for
both imagers is downloaded from the "86upgrade" folder on the Service Collection CD, using
the procedure in the Service Manual for the Kodak DryView 8600/8610 LASER IMAGERS
and by following the instructions in Modification Number 1.
Eastman Kodak Company, 2004
Pub No. 8F0642