Switch Control Board Srx5K-Scb3 Specifications - Juniper SRX5400 Manual

Table 4: SRX5K-SCBE LEDs
Label Color
FABRIC Green
ACTIVE
FABRIC Green
ONLY
None
OK/FAIL Green
Red
None

Switch Control Board SRX5K-SCB3 Specifications

Each SRX5K-SCB3 (SCB3) consists of the following components:
I2C bus logic for low-level communication with each component
Component redundancy circuitry
Control Board/Routing Engine mastership mechanism
Gigabit Ethernet switch that is connected to the embedded CPU complex on all components
Switch fabric to provide the switching functions for the MPCs
Control field-programmable gate array (FPGA) to provide the Peripheral Component Interconnect (PCI)
interface to the Routing Engine
Circuits for chassis management and control
Power circuits for the Routing Engine and SCB3
LEDs to provides status of the SCB3
Description
Software release
Cables and connectors
State
On steadily
On steadily
Off
On steadily
On steadily
Off
SCB3 with slot for Routing Engine
Junos OS Release 15.1X49-D10 and later
Slot for Routing Engine
Description
Fabric is in active mode.
SRX5K-SCBE operates in
fabric-only mode.
SRX5K-SCBE operates in
fabric/control board mode.
SRX5K-SCBE is online.
SRX5K-SCBE has failed.
SRX5K-SCBE is offline.
72