Srx5800 Services Gateway Craft Interface Fan Leds; Srx5800 Services Gateway Craft Interface Online Buttons; Table 9: Fan Leds - Juniper SRX5800 Hardware Manual

SRX5800 Services Gateway Hardware Guide

SRX5800 Services Gateway Craft Interface Fan LEDs

Related
Documentation

SRX5800 Services Gateway Craft Interface Online Buttons

28
SRX5800 Services Gateway Craft Interface Fan LEDs on page 28
Each fan LED is located on the top left of the craft interface.
the functions of the fan LEDs.

Table 9: Fan LEDs

Label Color
Green
OK
Red
FAIL
SRX5800 Services Gateway Craft Interface Overview on page 24
SRX5800 Services Gateway Craft Interface Card OK/Fail LEDs on page 27
SRX5800 Services Gateway Craft Interface Online Buttons on page 28
The craft interface has a row of Online/Offline buttons along its lower edge. Each button
corresponds to one slot in the card cage. The Online/Offline buttons are only supported
for slots containing MPC interface cards. You can install MPCs into slots
NOTE: The Online/Offline buttons are not supported for removal and
replacement of SPCs or SCB.
CAUTION: While traffic is passing through the SRX5400 Services Gateway,
particularly if the device is configured as part of a high availability (HA) cluster,
we strongly recommend that you do not push any of the Online/Offline
buttons.
To take an MPC offline using the Online/Offline buttons:
Press and hold the corresponding card's Online/Offline button on slot
1.
interface. The green
OK/FAIL
the button's LED and the MPC's LED are off.
Issue the CLI show chassis fpc
2.
shown in the sample output, the value Offline in the column labeled State indicates
that the MPC in slot is now offline:
1
user@host> show chassis fpc
State Description
On steadily Fan tray is functioning normally.
On steadily Fan tray has failed.
LED next to the button begins to blink. Hold until both
command to check the status of installed MPCs. As
Copyright © 2015, Juniper Networks, Inc.
Table 9 on page 28 describes
0/1 , 1 , and 2 only.
1 on the craft