Machine Specific Safety Equipment, Precautions And Hints; Safety Equipment For Repair Work; Safety Precautions Of The Printer - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS150.05E
1
1.1
1.2
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Machine specific safety instructions and hints for repair work
Machine specific safety equipment, precautions and
hints
This section describes all machine specific safety aspects to be considered
during repair work on the printer.
It is divided into the following sub-sections:
Sub-section

Safety equipment for repair work

Safety precautions of the printer

Guidelines regarding safety during repair work
Safety equipment for repair work
During repair work at printed circuit boards it is mandatory to wear an anti-
static wrist strap (order no.: CM+9.9999 0830.0).
This avoids static discharges on electronic components. Static discharges
can lead to defective components on the printed circuit boards.
Safety precautions of the printer
This section describes all machine specific safety precautions built into the
printer.
It lists following safety precautions:
Safety precaution
Safety switch
Supplementary ground cable
Printed copies of this document are not controlled.
DRYSTAR 5302
(Type 5366/100)
Repair and Service
Details see..
Details see..
1.2.1
1.2.2
Chapter 3.1 / 1
Agfa Company Confidential
1.1
1.2
1.3