Installation Planning Checklist - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS148.05E
1

Installation Planning Checklist

# Step
1.
Make yourself familiar with the
System Overview
2.
Make yourself familiar with the
scope of delivery
3.
Make yourself familiar with the
available accessories
4.
Have a look at the machine
dimensions
5.
Check the required free space
around the printer.
6.
Organize the required network
parameters to hook up the printer
in the existing network.
7.
Get up-to-date Connectivity
Release Documents for the
modalities which shall print on the
printer
8.
Compare the required ambient
and climatic conditions with the
condition at the installation place.
9.
Check the required electrical
connection
10. Make yourself familiar with the
printer specifications
11. Have a look at the printer safety
standards and regulations
12. Confirm the installation readiness
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
12-2007
Goal
To see in which surrounding the printer
will be installed
Basic information, to see whether
additional, site specific material for
installation might be required
To be able to order required accessories
before the installation
To be able to check, whether the printer
fits in the desired installation place
To see whether enough free space for
operation, repair and maintenance is
available.
To have all parameters in advance, to
prevent a delay during installation
To be prepared for modality specific
adjustments at the printer
To prevent installation of the printer in an
inappropriate environment, leading to
functional faults.
To be able to initiate all required
prerequisites in advance to allow proper
electrical connections
To have all printer parameters available
which might be required for people who
are in involved in installation and
operation of the printer.
To have the safety standards and
regulations for which the printer is tested
available in case they are requested by
the hospital administration.
To be sure that all required pre-
installation conditions are fulfilled.
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
5366/100
Installation Planning
section
Last
Page
Chapter 11 / 6
Agfa Company Confidential
1 2 3
See Okay
2
3.1
3.2
4
5
6
6.2
7
8
9
10