Basic Image Adjustment At The Printer Via Key-Operator Menu - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS150.05E
6.4.3
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Controls, Connections and Set Up Procedures

Basic Image Adjustment at the Printer via Key-Operator Menu

Accessible via menu:
Purpose:
Default value:
Example browser
screen:
Welcome to this
DryStar 5302 printer
Key-Operator - Change Image quality settings
CT2
Daily used name
CT2_ARC
Modality AE-title
Linear
Look Up Table:
Kanamori
Kanamorilike
Interpolation:
Replication
Linear
CubicHi-res
CubicBell
Maximum density: 280
285
290
295
Accept changes Discard changes Reset Values
Hint concerning interpolation settings:
Interpolation setting "Linear" usually gives too smooth image impression.
Interpolation settings "Replication" usually gives too "pixely" image
impression.
Both settings are used in exceptional cases only.
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
Key-operator menu - 2 Change settings - 4 Image
Quality - <Modality XYZ>
Adjust Image Quality in case it cannot be adapted
at the modality
•
Look-up table: Kanamori. Refer to Figure 17
•
Interpolation: Cubic HiRes -0.7. Refer to
Figure 18
•
Dmax 3.20
Key-Operator - Change Image quality settings
Select abosulte smoothing factor: (advised = -0.7)
Accept changes Discard changes Reset Values
Figure 16
Welcome to this
DryStar 5302 printer
Select kanamori like value:
100
-0.7
Chapter 1 / 23
Agfa Company Confidential
536601fs.cdr