AGFA DRYSTAR 5302 Technical Documentation Manual page 41

DD+DIS150.05E
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Controls, Connections and Set Up Procedures
Remark to PC Connection:
The printer default IP address is 169.254.10.10.
The printer automatically assigns an IP address to the PC, in case it is set-up
for obtaining an IP address automatically. This is done via Automatic Private
IP Addressing, short: APIPA. For more info refer to section 3.2.
Setting for Windows 98 / Windows ME / Windows 2000:
Select "Control Panel – Network – Properties – Internet Protocol (TCP/IP) –
Properties – Obtain an IP address automatically". Refer to Figure 2
Note: The path may differ for different operating systems.
Setting for Windows XP:
Select "Control Panel – Network Connections – Local Area Connection –
Properties – Internet Protocol (TCP/IP) – Properties – Tab: Alternative
Configuration – Automatic Private IP address". Refer to Figure 3
As the IP address of the printer after installation is usually different from
169.254.XXX.XXX, APIPA connection can only be used during installation.
After change of the IP address to one different from 169.254.XXX.XXX and
reboot the APIPA connection is not possible anymore.
Figure 2: Windows 98, ME, 2000
network setting
Recommendation: Make a bookmark in your browser for
IP address 169.254.10.10
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
Figure 3: Windows XP network
setting
Agfa Company Confidential
Chapter 1 / 7