Logical Printers Set-Up - AGFA DRYSTAR 5302 Technical Documentation Manual

DD+DIS150.05E
6.2
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Edition 1, Revision 0
2005-09-09
Controls, Connections and Set Up Procedures

Logical printers Set-up

Accessible via menu:
Purpose:
Default value:
The DICOM print SCP setup menu is only accessible via the browser pages.
Example browser
screen:
Before creating additional logical printers, first try to adjust the Image Quality
parameters at modality side! The default Image Quality of the printer fits
almost all applications!
Only if changes at the modality side cannot be done, or the modality does
not deliver the required results, create logical printers and make adaptations
for these applications at the printer side to reach the customers Image
Quality requirements.
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
Browser pages - Service Engineer Tools - DICOM
profile editor - Setup DICOM print SCP Servers
Define more than one logical printer. This may be
required in case a modality sends images from
different applications to the printer. See also Info
next page
Only one logical printer.
Internal name: DEFAULT_SCP
Called AE title: DS5302
HOME HELP DICOM Print SCP Setup
Setup one or more Dicom SCP servers on this device:
One 'Dicom Print SCP server' is capable of handling multiple Dicom
print associations
Dicom Print SCP
Internal Name: DEFAULT_SCP
Called AE title: DS5302
Listen at Port:
104
Max. allowed associations:
10
Secure channel (SSL):
Comments:
OK Create new Dicom Print SCP
Figure 11
Agfa Company Confidential
Cancel Changes require reboot
5366_Reg01_003_e.cdr
Chapter 1 / 17