AGFA DRYSTAR 5302 Technical Documentation Manual page 134

Repair and Service
Machine specific tools, software tools and auxiliary means
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 3.2/32
Agfa Company Confidential
(7) Select the desired parameter, in this case 'Perception LUT =
Kanamori_like' and set the 'Kanamori_like value' to 200.
(8) Check the checkbox before 'Perception LUT'.
(9) Enter AE title and nickname (nickname = the name the stuff uses for
this modality. The nickname will be displayed in the queue). Refer to
Figure 31.
(10) Select 'Submit'
Now whenever the host with AE title 'CTSCAN200' sends a print job to the
printer, the taste LUT will be adapted to 'Kanamori_like 200'.
In case the checkbox is checked before a parameter in the DICOM profile
editor, this parameter is used, no matter whether the modality sends the
parameter or not ('overwrite functionality')
In case the checkbox is not checked, the value defined in the host profile is
only used, in case it is not sent by the modality.
Image adaptations should be made preferably at the DICOM modality.
According to DICOM specifications, controlling the printer completely is done
at the modality.
The description below about creating a DICOM profile should only be
required, in case the modality does not allow to adapt a certain parameter or
does not provide it.
Printed copies of this document are not controlled.
Drystar 5302
(Type 5366/100)
DD+DIS150.05E
Edition 1, Revision 0
2005-09-09