DD+DIS150.05E
8
Software Release 1.9.2_C1
Type of new Software*
Release Date
Printer Serial Numbers
Availability
Prerequisites
*NOTE:
A software upgrade is a functional extension. An update (software patch) is an
internal change designed to correct bugs, fix defects, or otherwise minor
improvements to performance without changing the software's basic design,
structure or functionality.
On MedNet, GSO Library always the latest available software release can be
downloaded.
8.1
Solved Software Bugs
Software 1.9.2_C1 solves following software bugs:
Symptom 1
Sporadically the printer stops boot-up with message "Error System Failure":
When pressing the ON/OFF switch the printer cannot be switched off.
Access via network is not possible (to reboot remotely).
After unplugging and reconnecting the mains cable the printer usually starts up
normally.
CPU Driver problem
Cause
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 2
03-2011
Software Releases and Patches
Software Upgrade
11/2008
≥ SN 7069, plus 6827, 6867, 6887, 6902,
6917, 7067, 7052 and 7057
MedNet, GSO Library
None
DOCUMENT CONTROL NOTE:
DRYSTAR 5302
Type 5366/100
Repair and Service
Chapter 3.8 / 15
Agfa Company Confidential