Completion Of Installation; Customer Instruction - AGFA DRYSTAR 5302 Technical Documentation Manual

Controls, Connections and Set Up Procedures
8
8.1
The reader should always refer to MedNet to ensure that they are working with the latest copy of the document.
Chapter 1 / 28
Agfa Company Confidential

Completion of installation

The purpose of this section is to show the tasks that are required for customer
instruction and backup of printer settings.
The following table lists these tasks.
Task
Instruct the Customer in
operation of the printer
Save settings on backup
CF card

Customer Instruction

(1) Instruct the customer in following activities:
Activity
Switching on the printer: Warm up time 7 min.
Switching off the printer. It can take up to 20
secs. until the printer switches off
Loading films: RF tag and its function
Removing film jams
Show dust stripes on a previous test film and
how to prevent:
• Keep printer always closed
• Clean TH resistor line with alcohol and
lint free cloth when dust stripes appear or
when printer displays "Printhead cleaning
(2) Hand over the user and reference manual to the customer
Printed copies of this document are not controlled.
Drystar 5302
(Typ 5366/100)
Importance Accessible via ... Details see...
mandatory
mandatory Key-operator
menu
DD+DIS150.05E
-- 8.1
8.2
Refer to User or
Reference Manual ....
User manual: "Switching on
the Drystar 5302"
User Manual: "Switching off
the Drystar 5302"
User Manual: "Loading
films"
Reference manual
"Troubleshooting: Clearing
of film jams"
Reference manual
"Troubleshooting Checklist"
Edition 1, Revision 0
2005-09-09