Perform Engine Maintenance - Ford Models - Genie Z80/60 Service Manual

June 2011
REV D
Perkins Models:
Required maintenance procedures and additional
engine information are available in the
Perkins 704-30 User's Handbook
(Perkins part number TPD 1336E) OR the
Perkins 804C-33 Operation and Maintenance
Manual (Perkins part number SEBU7853-00) OR
the Perkins 804D Operation and Maintenance
Manual (Perkins part number SEBU8324-00).
Perkins 704-30 User's Handbook
Genie part number
Perkins 804C-33 Operation and Maintenance Manual
Genie part number
Perkins 804D-33 Operation and Maintenance Manual
Genie part number
Ford Models:
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG-425 EFI Operator Handbook
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
Part No. 88619
Section 3 • Scheduled Maintenance Procedures
E-4
Perform Engine Maintenance -
Ford Models
Engine specifications require that this procedure
be performed every 2400 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
101840
to good engine performance and service life.
Failure to perform the maintenance procedures
can lead to poor engine performance and
111332
component damage.
Ford Models
228841
Required maintenance procedures and additional
engine information are available in the
Ford LRG-425 EFI Operator Handbook
(Ford part number FPP 194-302).
Ford LRG-425 EFI Operator Handbook
Genie part number
To access the engine:
84792
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
Z-80/60
CHECKLIST E PROCEDURES
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
84792
3 - 65