Genie Z80/60 Service Manual page 227

June 2011
REV C
Error Source
MOTOR SPEED VALVE
BRAKE VALVE
AUX PROPEL VALVE
PLAT LEV UP VALVE
PLAT LEV DN VALVE
PLAT ROT CW VALVE
PLAT ROT CCW VALVE
JIB UP VALVE
JIB DN VALVE
JIB SWITCHES
PLAT ROT SWITCHES
STEERING JOYSTICK
LF STR ANG SNSR
RF STR ANG SNSR
LR STR ANG SNSR
RR STR ANG SNSR
LF STEER VALVE
RF STEER VALVE
LR STEER VALVE
RR STEER VALVE
FOOTSWITCH TIMEOUT
Part No. 88619
Error Type
Limited speed and direction frozen at
Fault check
zero and neutral, alarm sounds.
Fault Check, (both Affected functions disabled, display
contacts closed)
Value at 5.0 V
Value too high Limited speed and direction frozen at
zero and neutral, alarm sounds.
Value too low
Value at 0 V
Joystick speed and direction frozen at
Not calibrated
Initiate one second beep of audible
Just calibrated
Value at 5.0 V
Value too high
Limited speed and direction frozen at
zero and neutral, alarm sounds.
Value too low
Value at 0 V
Value at 5.0 V
Value too high
Limited speed and direction frozen at
zero and neutral, alarm sounds.
Value too low
Value at 0 V
Value at 5.0 V
Value too high
Limited speed and direction frozen at
zero and neutral, alarm sounds.
Value too low
Value at 0 V
Value at 5.0 V
Value too high Limited speed and direction frozen at
zero and neutral, alarm sounds.
Value too low
Value at 0 V
Limited speed and direction frozen at
Fault check
zero and neutral, alarm sounds.
Display message on LCD display.
Z-80/60
CONTROL SYSTEM FAULT CODES
Effects
message on LCD.
zero and neutral.
warning device.
Section 5 • Fault Codes
Recovery Actions
Power up controller with the problem
corrected.
Power up controller with the problem
corrected.
Power up controller with problem
corrected.
Calibrate joystick.
Self-clearing (transient)
Power up controller with problem
corrected.
Power up controller with problem
corrected.
Power up controller with problem
corrected.
Power up controller with problem
corrected.
Power up controller with the problem
corrected.
Recycle power.
Continued on next page
5 - 9