Genie Z80/60 Service Manual page 107

June 2011
REV E
Screen To Enter
Lift With the key
Functions switch off,
Ramps press and
hold the
button and
turn the key
switch to the
on position.
Release the
button
and press
.
Part No. 88619
Information Displayed
Primary Boom Up/Down ramp accel %
Primary Boom Up/Down ramp decel %
Primary Boom Extend/Retract ramp
accel %
Primary Boom Extend/Retract ramp
decel %
Secondary Boom ramp accel %
Secondary Boom ramp decel %
TT-Rotate ramp accel %
TT-Rotate ramp decel %
Jib Up/Down ramp decel %
Z-80/60
Section 4 • Repair Procedures
DISPLAY MODULE
Range
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
150% max and 50% min,
100% (default) 5%
increment
4 - 5