Use of plywood cribbing to elevated. NOTE: If the machine does not have a lock-out switch, contact your Genie dealer to order provide a level surface for safe a switch installation kit.
Cribbing Instructions First Edition • Fifth Printing Construction Specifications The specifications on this page are for cribbing • Ramps are to be constructed in a series of under machines with wheels. For machines with steps. Each step shall be a minimum of 12 tracks, see the specifications on the following inches long.
Page 5
First Edition • Fifth Printing Cribbing Instructions Added page for TRAX models. Construction Specifications Different specs. highlighted. The specifications on this page are for cribbing • Ramps are to be constructed in a series of under machines with tracks. For machines with steps.
Cribbing Instructions First Edition • Fifth Printing Workplace Inspection Be aware of and avoid the following hazardous situations when using cribbing: • unstable surfaces that could shift under cribbing • surfaces that cannot support the cribbing (refer to the floor loading specifications in the operator's manual) Observe and Obey: •...
2 Press and hold the enter button and turn 2 Make sure the Genie aerial lift has been the key switch to ground control. modified with a lock-out switch that disables the 3 When the system beeps, release the enter drive function.