Perform Engine Maintenance; Check The Generator Belts And Pulleys; April - Genie Z-34/22 Service Manual

Service Manual
Checklist A Procedures
A-4

Perform Engine Maintenance

Engine specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
• Oil level
• Coolant level
• Oil, fuel and coolant leaks
Required maintenance procedures and additional
engine information are available in the following
Operator and Maintenance manuals.
Kubota - Z482-E
Genie part number
20
A-5
Check the Generator Belts and
Pulleys
Engine specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
Maintaining the generator belts and the pulleys is
essential to good generator performance and
service life. The generator will not operate properly
with loose or defective belts and continued use
may cause component damage.
52958
Note: Charging the batteries with the engine does
not fully charge the batteries. Periodically, use the
AC battery charger to fully charge the batteries.
1 Be sure that all fasteners and cables on the
generator are tight.
2 Remove the engine flywheel cover mounting
fasteners, then remove the cover.
3 Be sure that the pulley mounting fasteners are
tight and that the pulleys show no signs of
damage or unusual wear.
Z-34/22 Bi-Energy

April 2016

Bodily injury hazard. Do not
inspect while the engine is
running. Remove the key to
secure from operation.
Bodily injury hazard. Beware of
hot engine components.
Contact with hot engine
components may cause severe
burns.
Part No. 139234