Perform Engine Maintenance - Deutz And Perkins Models - Genie Z80/60 Service Manual

Section 3 • Scheduled Maintenance Procedures
CHECKLIST E PROCEDURES
E-5
Perform Engine Maintenance -
Deutz and Perkins Models
Engine specifications require that this procedure
be performed every 3000 hours.
Proper engine maintenance, following the engine
manufacturer's maintenance schedule, is essential
to good engine performance and service life.
Failure to perform the maintenance procedures
can lead to poor engine performance and
component damage.
Deutz Models:
Required maintenance procedures and additional
engine information are available in the
Deutz 913 Operation Manual
(Deutz part number 0297 7341) OR the
Deutz BF4L2011 Operation Manual
(Deutz part number 0297 9929) OR the
Deutz TD2011 Operation Manual
(Deutz part number 0312 3547)..
Deutz 913 Operation Manual
Genie part number
Deutz BF4L2011 Operation Manual
Genie part number
Deutz TD2011 Operation Manual
Genie part number
3 - 66
Perkins Models:
Required maintenance procedures and additional
engine information are available in the
Perkins 704-30 User's Handbook
(Perkins part number TPD 1336E) OR the
Perkins 804C-33 Operation and Maintenance
Manual (Perkins part number SEBU7853-00) OR
the Perkins 804D Operation and Maintenance
Manual (Perkins part number SEBU8324-00).
Perkins 704-30 User's Handbook
Genie part number
Perkins 804C-33 Operation and Maintenance Manual
Genie part number
Perkins 804D-33 Operation and Maintenance Manual
Genie part number
To access the engine:
1 Remove the engine tray retaining fastener
located under the engine tray. Swing the engine
tray out and away from the machine.
2 Install the fastener that was just removed
through the engine tray and into the engine tray
anchor hole in the turntable.
62446
84794
139320
Z-80/60
Crushing hazard. Failure to install
the fastener into the engine tray
anchor hole to secure the engine
tray from moving could result in
death or serious injury.
Part No. 88619
June 2011
REV D
101840
111332
228841