Genie Z80/60 Service Manual page 154

Section 4 • Repair Procedures
ENGINES
Deutz BF4L-2011 models:
7 Tag and disconnect the wiring from the bell
housing.
8 Remove the U-bolt from the exhaust flex pipe at
the muffler.
Burn hazard. Hot engine parts can
cause severe burns.
9 Remove the muffler bracket retaining fasteners
from bell housing. Remove the muffler and
bracket assembly from the engine.
10 Support the drive pump with an appropriate
lifting device. Remove all of the remaining bell
housing engine fasteners.
11 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
Component damage hazard.
Hoses can be damaged if they are
kinked or pinched.
12 Remove the flex plate mounting fasteners,
and remove the flex plate from the engine
flywheel.
4 - 52
Perkins 704-30 Models:
7 Remove the clamp securing the air intake elbow
to the air cleaner assembly. Remove the air
intake tube from the engine. Do not remove the
elbow from the air intake tube.
8 Support the drive pump with an appropriate
lifting device. Remove all of the bell housing to
engine fasteners.
9 Carefully pull the pump and bell housing
assembly away from the engine and secure it
from moving.
Component damage hazard.
Hoses can be damaged if they are
kinked or pinched.
10 Remove the flex plate mounting fasteners,
and remove the flex plate from the engine
flywheel.
Perkins 804C-33 Models:
7 Tag and disconnect the wiring from the bell
housing.
8 Remove the exhaust pipe clamp at the muffler.
Burn hazard. Hot engine parts can
cause severe burns.
9 Remove the muffler mounting bracket
fasteners. Remove the muffler and bracket
assembly from the engine.
10 Remove the hose clamps from the air cleaner
elbow and the engine intake manifold.
11 Remove the air cleaner mounting bracket
fasteners. Remove the air cleaner and bracket
assembly from the engine.
12 Support the drive pump with an appropriate
lifting device. Remove all of the remaining bell
housing to engine fasteners.
Z-80/60
June 2011
REV C
Part No. 88619