Manifold Component Specifications; Valve Coil Resistance Specifications - Genie Z80/60 Service Manual

February 2015
REV G
Drive manifold
Hot oil relief pressure
Brakes
Brake release pressure
Drive motors
Displacement per revolution, variable
(2 speed motor)
Hydraulic tank return filter
High pressure filter
High pressure filter
bypass pressure
Medium pressure filter
Medium pressure filter
bypass pressure
Hydraulic tank return filter
Manifold Component
Specifications
Plug torque
SAE No. 2
SAE No. 4
SAE No. 6
SAE No. 8
SAE No. 10
SAE No. 12
Continuous improvement of our products is a
Genie policy. Product specifications are
subject to change without notice.
Part No. 88619
280 psi
19.3 bar
215 psi
14.8 bar
0.9 to 2.7 cu in
14.7 to 45 cc
≥ 200
Beta 3
102 psi
7 bar
≥ 200
Beta 3
51 psi
3.5 bar
10 micron with
25 psi / 1.7 bar bypass
50 in-lbs / 6 Nm
14 ft-lbs / 18.9 Nm
23 ft-lbs / 31.2 Nm
36 ft-lbs / 48.8 Nm
62 ft-lbs / 84.1 Nm
84 ft-lbs / 113.9 Nm
Z-80/60
Valve Coil Resistance
Specifications
Note: The following coil resistance specifications
are at an ambient temperature of 68°F / 20°C. As
valve coil resistance is sensitive to changes in air
temperature, the coil resistance will typically
increase or decrease by 4% for each 18°F / 20°C
that your air temperature increases or decreases
from 68°F / 20°C.
Proportional solenoid valve, 12V DC
(schematic items G, W and AB)
Proportional solenoid valve, 12V DC
(schematic items R)
3 position 4 way solenoid valve, 12V DC
(schematic items BA, BB, CA, CB, CP, CQ,
GB, GP and GQ)
3 position 4 way solenoid valve, 10V DC
(schematic items O and S)
2 position 2 way solenoid valve, 10V DC
(schematic items J)
2 position 2 way solenoid valve, 10V DC
(schematic items C and P)
2 position 3 way solenoid valve, 10V DC
(schematic items H, V, X, Z, AA, EE and EF)
2 position 3 way solenoid valve, 12V DC
(schematic items BC, BD, CE, CF,
FB and FC)
Section 2 • Specifications
SPECIFICATIONS
4.8 Ω
9 Ω
9 Ω
6.3 Ω
3.3 Ω
6.3 Ω
6.3 Ω
9 Ω
2 - 5